Show is removed from the lower film end device for removing the emulsion® completely apply water : : emulsion is to splicers have a scraping To remove it more at that section of the film be removed strip of film Host Be Excess water and from which the careful to moisten merely the narrow will run beyond the desired point and will cause the emulsion to flow and the film to warp ' easily The best way to apply the water is with the fingertip which has just a trace of moisture on it Rub the moistened finger tip across the exposed end and scrape film clean of has been removed all emulsion After every trace of emulsion apply a thing coat of film cement to the cleansed i I Complete the end splice The brush applicator should be wiped off on the side of the cement bottle otherwise an excess of cement will be applied This excess cement will ooze out at the edges warp the film and result in a bulky messy appearing splice It is a good practice to wipe off with a clean cloth the cement that does ooze out The Wipe off the top side while the film is still in the splicer underside The cement may be cleaned after removing the film from the splicer has partially hardened but can be rubbed off easily with a cloth Storing pictures In order to preserve pictorial materials and also to insure availability when wanted sort of a filing system Albert J The Care and Maintenance of Motion Picture Educational Screen Vol XXVI No 4 Apr 1947 p 199 ®Dobie Films some |