OCR Text |
Show pin may be removed 3nd g be carried out. The spring need not be disturbed while is KOing on. After the oper. Pleted, the valve is droppe. t'ne pin thrust in and the e over, so that the compresspi moved. KOr Cor valve springs: Use a piece of pipe of, say, three-quarters of an inch in diameter. Cut off a length of this that will just fit in between the valve spring- washer and the engine base, when the-valve is fullv opened. Cut out a longitudinal section of this bit of pipe, so that it may be slipped in around the push rod and stem. Push the compressor compres-sor into place when the valve is open ;md turn the engine over until the rod settles down. After the valve has been pushed down througli the washer, the PREST-O-LITE TANKS HANDY FOR WELDING Furnished in This Section to the Trade by E. E. Darling, Manager of Monarch Motor Company. Formerly the breaking of an important import-ant part of a car, such as the frame, meant the necessity of. getting a complete com-plete new frame. Now it may be weld-ed weld-ed together, making "a new piece of solid metal, as good or better than the original piece. . i'lio oxvacetylcnc - torch, for winch gas is supplied by tanks put out-by the Prest-O-Lite company, is thus saving thousands of dollars daily, is. the estimate esti-mate of V,. Ii. Darling, manager of the Monarch Motor company. 139 East Second Sec-ond South street. Mr. Darling's company com-pany has been named distributor in tins section for tanks put out by the Prest-O-Lite company, and is able to furnish metal and iron workers Avith this wcld-in? wcld-in? outfit. |