OCR Text |
Show Effective Motor Cut-Out Is Easily Constructed An easily built and effective motor cut-out can be constructed from an old tin can and a few discarded parts, as shown in Fig. 3. Remove the exhaust pipe and cut a large hole in It. Cut holes in the ends of the tin can so that it will slip over the pipe. Fit one bolt as a stop and another for the Uj-ii jfj CUT-OUT zrtfflflTffk. dash) stCT,0N rShfW ' I BOARD . Jea i J HOLE MUFFLER i exhaust Tin can a pipe How to Make an Effective Motor Cut-Out, Cut-Out, Using an Old Tin Can and a Few Discarded Parts. spring that pulls the can back over the hole when the valve stem on the end of the cord is allowed to slide Into In-to the hole in the dash. The hole In the exhaust pipe can be cut most easily eas-ily by sawing a V-shaped notch In the pipe with a hack saw. Notch area should equal pipe cross section. Popular Pop-ular Science Magazine. |