OCR Text |
Show NOTICE TO BIDDERS The City of Moab will accept ac-cept bids until 8:30 p.m. on April 8, 1969, on the following follow-ing pieces of equipment, at which time all bids will be publicly opened and read: ONE POWER SPRAYER, 2-wheel type with tires, 200 gal. capacity, pressure to 400 lb. PSI, output 5 gal. pet-minute, pet-minute, able to handle any sprayable material. Stainless steel tank with agitator, 50 ft. hose,34-inch, pressure to 600 lb. PSI. Spray nozzle and handle with instant on and off trigger control, aluminum nozzle and handle, -inch hose thread. Adjustable nozzle noz-zle fog to stream. ONE MOWER: Mower Assembly: Mower to be hydraulically driven with independent pump to supply power to rotors. Mower, Mow-er, mounting brackets and controls must be designed so the mower can be mounted on either the right or left side of the tractor. Oil reservoir res-ervoir -tank shall be located on loader side-frame and in a manner so as not to interfere inter-fere with operator's vision. To have' hydraulic motor drive with V-belt drive between hydraulic motor and rotors, and to have overload protection. Rotors to be equipped with adjustable adjust-able Timpken bearings. Rotor Ro-tor to be .offset. The mower shall be equipped with a ball bearing idler pulley to tighten tight-en center belt to maintain hub center distance. Blades to be designed for easy removal re-moval for sharpening. . Double rows of chain shielding are to be installed on front and rear edges of cutter frame. The mower hood covering rotors shall be constructed from not less than 11-gauge steel to prevent pre-vent distortion. Mower to be in accordance with the following fol-lowing detailed specifications: specificat-ions: Cutting width 60 inches. inch-es. Cutting height, maximum, 14 inches. Cutting Height, minimum, 2 inches. Number of rotors, two. Number of blades per rotor two. Length of rotor blade, 31 inches. Rotor Ro-tor speed, 1800 R.P.M. Gear pump capacity at 1400 R.P.M. 25 G.P.M. Hydraulic reser voir capacity, 35 gallons Hydraulic motor power at rotors, 12 H.P. The mower is to be completely com-pletely assembled and ready for operation when receiv-ed. receiv-ed. Bid price is to include two (2) extra sets of blades. ONE VIBRATORY ROLLER, ROLL-ER, self propelled. 10 ton static roller. Submit specs on your bid. Bids will be accepted on each item separately. All equipment to be delivered deliv-ered F.O.B. Moab City Yard. The City of Moab reserves the right to reject any or all bids in the bst interent of the City. sWINFORD BUNCE, Mayor Published in The Times-Independent, Moab Utah, Mar. 27, 1969. |