OCR Text |
Show Care in Handling Wires When Assembling Set When assembling a receiving set, wires which comiect to the plate of the tube should be kept away from all other wires. Wires connecting -with the grid should be kept away from the front of the panel and from points that connect with the ground, otherwise other-wise when the hand approaches dial a capacity effect will be introduced that will cause howls. Wires should run at right angles wherever possible and especially the plate and grid wires, If It is necessary for them to cross each other. Iligld wire should be used because flexible wire is likely to sag or swing a little if the set is jarred and tuning will be disturbed. The wire does not have to be covered with insulation. All joints must be clean, firm and soldered. |