| Show Convenient Method of Forcing Brass Bushing Driving a bronze or brass bushing with Uh a wooden mallet often is I. difficult and always alws s Is hard on the mallet maUet A much simpler way to force the bushing Int into place is 18 shown 11 In the illustration Make Stake up a special bolt with with- thE shank slightly smaller than the hole through the bushing The shoulder on the bolt should be square so that it will not Injure the edge of the hole By Bl turnIng taming the nut you can pull the bushing into place easily STEERING NUT ramT wASt eR ARM 6 EARING y yON ON BOLT L Simple Method of Forcing Bushing Into Place Using Special Bolt With Nut and Washer This method of Inserting a n bushing hushing often otten will save sn dismounting the part to get It Into the arbor press and may clay permit a Job to be done where the shape shap of the part Is such suell that It Is hard to get gt at with th the press Rest results will be obtained If It the boltIs bolt boltIs boltis is cut with a fine tine thread Note that when a bushing Is for forced d dInto into place the hole actually Is reduced reduced reduced re re- re- re In size sufficiently to cause a aJam ajam ajam Jam if th the bolt Is made too close a fit Popular Science Monthly |
