Show SOLDER IS OF GREAT VALUE in making battery connections connection 11 care should bo be taken that metal hietal overflow when a wire carrying electric current Is to be attached to a terminal or to another piece of wire the common practice Is to make tit alia connect connac tion wrap it with tiro tire tape and call it a job the connection serves very well until corrosion of the parts fets ets in when a resistance to of tho the current Is set up tip with increasingly detrimental results As a matter of fact all connections of this kind should be soldered as soon as they are made in soldering these parts care should be taken to ao keep tho the solder from lowing flowing on any part of the wire except the terminal as the heat tends to make the wire clr brittle and likely to break in doing tile tho work hold the tinned surface of the lie soldering iron close to the places where the juncture la Is to be made hold the iron steadily in the one place so that solder flows freely on the connection tion and after completing the job test with tile the battery to see that the current flows properly |