Show JACK FOR THE HEAVY WAGON ono on described and illustrated pl the bill for lightness and alo also for strength aa an it la Is difficult to get a jack strong enort for the heavy wagons without it being to 10 very beary beaty the one described bed falle le the bill for Ight lightness ness and strength 0 one ono piece 2 by 8 inched SO 30 inches long one place 2 by 6 inches 30 inches agag one piece 2 by 4 inched inches 10 inches long one piece of no 9 wire 5 feet long two nails to hold bold the wire to the sides of the upright piece one iron bolt three quarters by 61 6 inches to hold the lever two 2 by 2 inch mortises are cut in tho the 2 by 8 12 inches from the front handy wagon jack end tenons are cut on the upright 2 by 6 to fit them the nails malls are driven in to the eldee sides of the upright piece to hold the wire the bolt Is put through the mortise and the lever and if it the grease is to handy you are rendy ready to grease your wagon |