Show stranded wire how flow to make good fastening there are quite n few ln in wo me w o use stranded wire for their nert als or possibly for the guy wires those who have tried to fasten this kind of wire to insulators or other supports hove have found that it is a n cult thin thing to secure it a satisfactory and neat job it the following scheme Is followed out a workmanlike fastening can an bo be that will not only look better lut but will be stronger than usually found i tend the stranded wire through or around the insulator and pull about foin fohr inches through secure some copper wire or galvanized iron wire and begin winding as shown nt at A very tightly and securely for about rubout one half Sti stranded alvIed wire 1 A 1 48 affre showing an excellent S splice lice that will appearance add to appearance to three thre quarters of an inch then bend tile the remaining end over und and continue tile the winding its as shown at U 11 cut tile the binding wire off if d this joint may be soldered A will be obtained that will easily stand pull equal to the wire itself radio news |