OCR Text |
Show FORM FOR A CONCRETE TANK One Shown In Illustration That Will Not Break and Will Come Out Easily. I have found an inside form for building concrete tanks that is a great Improvement on anything that I have yet seen. You cannot possibly break it, and it comes out easily 24 hours after the tank Is poured, says a writer in Farm and Home. The form is made In four pieces, but instead of being cut at the corners, the cut is made just around the corner in each case, as shown in the Illustration. The best way to make it is to build Tank Form. it of the required size, then take a saw and cut down the sides a few Inches from each corner, as at a. Make these cuts diagonal, so the form will pull apart easily. Then nail a board, b, securely over each cut, and allow the nail heads to project slightly, slight-ly, so that they can easily be pulled with a hammer. |