OCR Text |
Show Polishing a Varnished Surface. In order to obtain a good surface for polishing, encli coat, of varnish must be sandpapered, rubbed or mossed down, as a polish can ho obtained ob-tained only on n tturfnqe that Is perfectly per-fectly level. Therefore, tlm last coat of varnish, when thoroughly dry and hard, must bo rubbed with No, 00 steel wool or FF pumlco stone and water wa-ter or oil, following with rotten stone hnd water or oil, and when perfectly dono cleaned off thoroughly to avoid Bcrutches, For producing a very fine polish, says a woll-known authority, mix with one pint of shellac thnt has been cut In grain alcohol ono hnlf pint of raw Unseed oil. Shake well every time when applying It to n woolen cloth, rub briskly until tho polish Is hard and lustrous. Carpentry and 'lulldlng. |